Cone

2.Creates a cone-shaped polygon mesh.

• Specify center point for base of cone: Specify a point (1)
• Specify radius for base of cone or [Diameter]: Specify a distance or enter d

Radius for Base

Defines the base of the cone by its radius.

• Specify radius for top of cone or [Diameter] <0>: Specify a distance, enter d, or press ENTER

Radius for Top
Defines the top of the cone by its radius. A value of 0 produces a cone. A value greater than 0 produces a truncated cone.

• Specify height of cone: Specify a distance
• Enter number of segments for surface of cone <16>: Enter a value greater than 1 or press ENTER

Diameter for Top
Defines the top of the cone by its diameter. A value of 0 produces a cone. A value greater than 0 produces a truncated cone.

• Specify diameter for top of cone <0>: Specify a distance or press ENTER
• Specify height of cone: Specify a distance
• Enter number of segments for surface of cone <16>: Enter a value greater than 1 or press ENTER

Diameter for Base
Defines the base of the cone by its diameter.

• Specify diameter for base of cone: Specify a distance
• Specify radius for top of cone or [Diameter] <0>: Specify a distance, enter d, or press ENTER

Radius for Top
Defines the top of the cone by its radius. A value of 0 produces a cone. A value greater than 0 produces a truncated cone.

• Specify height of cone: Specify a distance
• Enter number of segments for surface of cone <16>: Enter a value greater than 1 or press ENTER

Diameter for Top
Defines the top of the cone by its diameter. A value of 0 produces a cone. A value greater than 0 produces a truncated cone.

• Specify diameter for top of cone <0>: Specify a distance
• Specify height of cone: Specify a distance
• Enter number of segments for surface of cone <16>: Enter a value greater than 1 or press ENTER